Wet-Sanding The Foggy Headlight Lenses

• Start wet-sanding with the #400 grit sand paper until the headlight lenses looks clean without any blotches or manufacturer sealant left on the lenses.
• Then proceed to #1000 grit sand paper. Keep misting the lenses while sanding. The lenses will start looking cleaner and smother.
• Now use the #2000 grit sand paper. Remember to keep misting the headlight with water while sanding. The headlight will start feeling smother and looking cleaner. You will start seeing the bulbs on the inside of the headlights.

               #400 / #1000 / #2000 wet sand paper enclosed in our headlight restoration kit.

Polishing The Now Clean Headlights 

Use the headlight polish #2 and a white towel in our headlight restoration kit.
Squeeze a dime size amount of polish onto the white towel
Rub vigorously until the lens shines. Continue until all of the lenses become clear. Absolute clarity is not needed.
Wipe off excess polish.
Examine the lens for any area that is not clear. These areas will need a little more sanding followed by further polishing.

Pre Treat The Headlight Lenses

• Spray the headlight lenses with the pre-treat spray #3 in the kit making sure it covers the entire lenses including the edges. Wait for about 10 to 15 seconds and wipe completely dry with the other white towel.

This step removes any residual polish or grease that is on the headlight lenses. Also it prepares the lens to receive the sealant to form a strong bond.

Sealing Your Clean Headlights

Now that your headlights are clean we can proceed to sealing them so they last a long time.

• Before sealing make sure the headlights and the surrounding areas are completely dry.
• Open the bottle of lenses sealer #4 and saturate the folded edge of the blue towel in your headlight restoration kit.
• Now starting from the right or left top corner wipe across the headlight lenses. Continue wiping across the entire lenses until the lenses is completely sealed.

Note: Overlap passes by 50% this will allow you to maximize your sealant coverage.